Loading......

Welcome to Shoeberry, a Leading Tanning Groups in India

Leather Making

Born out of a desire to bridge the traditional leather making process of a decade old tannery business into the modern manufacturing process, Shoeberry has transformed to Gold Rated Reliable and sustainable supplier to Major Global Brands of Europe and Asia

23 Steps of Leather Making

1. Curing

Hides, the term applied to animal skins used in leather production, must be preserved in order to prevent deterioration. These preservation methods often involve salting, freezing, chilling, or the use of chemicals.

2. Soaking

Once the hide has been cured, it left to soak in water for several hours – sometimes even days. The objective in this step is to rehydrate the hide, as well as to remove any excess salt or dirt. For instance, unwanted deposits of dirt may have occurred during transportation.

3. Painting

Do not let the term confuse you. When describing how leather is made, painting refers to removing wool from sheepskins using sulphides.

4. Liming

While liming has a number of purposes, the primary function of this step is to remove any unwanted hair from the hide through the introduction of alkali. Once the hair has been removed, we are left with raw animal skin. This is more commonly referred to as a pelt.

5. Fleshing

As the term suggests, fleshing is the process of passing the pelt through a machine that removes any tissue from the flesh side. In some instances, a pelt will also be split into layers at this stage.

6. De-Liming

This step involves the graduate neutralization of alkali in the pelt. It is important that this is done gradually, as a rapid change in acidity could result in tissue distortion.

7. Bating

Enzymes are applied to the pelt, causing it to flatten and relax.

8. Pickling

Tanning requires pelts to be mildly acidic; therefore, pickling involves the application of weak acids or salt solutions. If a pelt is not to be tanned for several months, a strong solution may be applied to act as a preservative.

9. De-Greasing

Just prior to tanning, a pelt must have any excess grease removed with water or a mild solvent.

10. Tanning

Tanning chemically alters the collagen structure of a pelt, such that it is protected against chemicals, moisture, and microorganisms. To put it simply, converting the proteins found in a pelt in a stable material occurs in this step. It is generally done by using:
Minerals: A mineral, such as salts of chromium, is the most common leather tanning material.
Oils: When a pelt is tanned with oil, the result is a much softer leather for more fashionable products.
Vegetables: Plant extracts may be used to produce thick, firm, and brown leather, ideal for belts, shoes, bags, and cases.
Once a pelt has been tanned, it is now considered leather – but there are still several steps to go before it is ready for sale to a manufacturer.

11. Splitting

In this step, a machine is used to slice leather into two layers. One of the resulting layers will be without a grain surface. This piece can be used to produce suede or have an artificial grain surface applied to it.

12. Shaving

With the piece that has a grain surface, another machine is used to shave the non-grain side. This is how leather is made to a desired level of thickness.

13. Neutralization

This step in how leather is made is done to remove residuals from any of the previous chemical applications. Additional tanning materials may also be applied to create a particular style or texture in the finished product.

14. Dyeing

Depending upon the intended use for the finished leather, any number of colours may be applied at this stage. This is how leather is made in black, red, brown, and even white varieties.

15. Fatliquoring

This process involves lubricating the leather with oil to ensure it is both flexible and soft. This is especially important when producing leather for fashion, as the absence of oil will cause the leather to become hard as it dries out.

16. Samming

Moisture must be taken out of the leather before it will be ready for production. Almost half of the water is removed through a number of different machines.

17. Setting Out

The leather is now stretched and the grain surface is smoothed out. In so doing, the moisture remaining in the leather is further reduced.

18. Final Drying

Leather is generally dried until less than 20% water content remains.

19. Staking & Dry Drumming

To ensure that the leather is soft and flexible, it is further massaged in a staking machine. This process separates the fibres. Once complete, the leather is placed inside a rotating drum for extensive tumbling.

20. Buffing & Brushing

The flesh surface of the leather is now totally removed through buffing to produce a softer feel, or simply to reduce the overall thickness. A thorough brushing happens thereafter to remove any dust accumulated during buffing.

21. Finishing

Finishing occurs in leather production to ensure even colour, remove any defects on the grain surface, correct the level of gloss, and to add a protective and water resistant surface.

22. Final Grading

Prior to sale to a manufacturer, the tanner must grade the colour intensity and uniformity of the leather, as well as its feel, softness, thickness, and texture. Any naturally occurring defects, such as scratches, must also be noted during the final grading.

23. Measurement

The final product is now complete! This is how leather is made from start to finish. All that remains in this step is to measure the area of each individual piece, as leather is sold by area. To ensure complete accuracy, measurements are done by machine.

Back To Top